Disclaimer

Last updated: October 1, 2026

1. General Information

The information provided on Berolix ("the Site") is published for general informational and reference purposes only.

Berolix is an independent bearing information resource that aggregates and organizes bearing designations, dimensions, load ratings, speed limits, designation systems, and other related technical reference material.

Nothing on the Site constitutes professional engineering advice, a design recommendation, or a substitute for consultation with a qualified engineer or the bearing manufacturer.

2. Data Sources and Compilation

The data presented on the Site is compiled from publicly available sources, which may include, without limitation:

Data is collected, normalized, and reorganized by the Site for presentation. This compilation process may introduce errors, omissions, or inconsistencies. Source material may also be updated, revised, or withdrawn by its original publisher without notice to the Site.

Not every designation or variant shown on the Site can necessarily be verified against a current manufacturer catalog. Some entries may be derived from secondary or aggregated public data.

Where manufacturers publish different values for the same nominal bearing, the Site may display values from multiple sources side by side. Such values represent the respective source data and may not be directly comparable because test conditions, rating methods, catalog editions, and other technical assumptions may differ.

3. No Warranty of Accuracy

All content on the Site is provided "as is" and "as available", without representation or warranty of any kind, express or implied, including, but not limited to, warranties of accuracy, completeness, timeliness, merchantability, or fitness for a particular purpose.

Bearing ratings, dimensions, limiting speeds, clearance classes, designations, and other technical values may differ between manufacturers, catalog editions, product configurations, and other circumstances. Information shown on the Site may be outdated, incomplete, or incorrect.

Always verify critical values against the manufacturer's current official catalog, product drawing, technical specification, or other official documentation before making any design, selection, procurement, safety-related, or other consequential decision.

4. Engineering and Selection Tools

The Site may provide interactive tools, including selection guides, specification comparison tools, and other decision-support tools.

These tools provide simplified guidance based on compiled data, predefined rules, and generalized engineering heuristics. Their outputs are indicative only and must not be relied upon as a final engineering determination.

Failure-analysis tools in particular are intended to support the collection and interpretation of observations. They do not replace qualified engineering assessment, hands-on inspection, metallographic examination, laboratory testing, or other appropriate investigation of an actual failed component.

5. Trademarks and Brand Names

All brand names, manufacturer names, trademarks, trade names, and product designations referenced on the Site are the property of their respective owners.

References to such names are made solely to identify manufacturers, products, designations, and published technical information for informational and comparative purposes.

Unless expressly stated otherwise, Berolix is not affiliated with, endorsed by, sponsored by, or officially connected with any referenced manufacturer or its subsidiaries.

Unless expressly stated otherwise, the content presented on the Site has not been reviewed or approved by the referenced manufacturers.

6. External Links

The Site may contain links to third-party websites or services. These links are provided for convenience and reference purposes only.

Berolix has no control over, and assumes no responsibility for, the content, accuracy, availability, privacy policies, security, or practices of third-party websites or services.

A link to a third-party website does not constitute an endorsement, recommendation, or guarantee by Berolix unless expressly stated otherwise.

7. Limitation of Liability

To the fullest extent permitted by applicable law, Berolix and its operator(s) shall not be liable for any direct, indirect, incidental, consequential, special, or exemplary damages, including, but not limited to, damages arising from loss of profits, production downtime, equipment damage, procurement errors, data loss, or other losses arising out of or in connection with the use of, or inability to use, the Site or reliance on any information, value, designation, or tool output provided on the Site.

Nothing in this Disclaimer is intended to exclude or limit any liability that cannot lawfully be excluded or limited under applicable law.

8. Errors and Corrections

We welcome corrections and factual feedback.

If you believe that a value, designation, or other item on the Site is incorrect, please report it through the "Report a correction" link on the relevant bearing page or through the contact form.

Reported information may be reviewed and, where appropriate, checked against published sources before changes are made. Berolix does not guarantee a particular response time or that every reported item will be changed.

9. Changes to the Site and This Disclaimer

Berolix may add, modify, or remove data, features, and pages at any time.

This Disclaimer may also be updated from time to time. The "Last updated" date above indicates the most recent revision.

10. Professional and Jurisdiction-Specific Advice

The information provided by Berolix is general in nature and is not intended to provide legal, regulatory, engineering, procurement, safety, or other professional advice specific to any particular jurisdiction, industry, machine, application, or operating condition.

Users are responsible for obtaining appropriate professional or manufacturer advice where required.

11. Contact

Questions or comments about this Disclaimer can be submitted through the contact form.