NU2338 Cylindrical Roller Bearing (190x400x132mm)
How to read this designation →
Bearing dimensions and basic technical information.
Manufacturer Ratings
Load-rating symbols are printed as each manufacturer writes them in its own catalogue, so the same quantity can carry a different symbol from brand to brand.
| Brand | Dynamic Load Rating | Static Load Rating | Fatigue Load Limit |
|---|---|---|---|
| SKF NU 2338 ECML | 1830 kN | 2550 kN | 236 kN |
| NSK NU2338E | 2170 kN | 2520 kN | — |
| Schaeffler (FAG) NU2338-EX-TB-M1 | 1890 kN | 2650 kN | 295 kN |
| NTN NU2338 | 1680 kN | 2220 kN | 196 kN |
| Timken NU2338EMA | 2060 kN | 2500 kN | — |
Speed Ratings
Speed limits depend on sealing and lubrication, and definitions differ by manufacturer. Contact-sealed variants are normally greased for life and run slower. Always confirm the exact variant in the manufacturer's table.
| Brand | Grease open / shielded | Oil open | Reference | Limiting |
|---|---|---|---|---|
| SKF NU 2338 ECML | — | — | 1,500 r/min | 3,000 r/min |
| NSK NU2338E | 1,300 r/min | 1,600 r/min | 1,400 r/min | 2,000 r/min |
| Schaeffler (FAG) NU2338-EX-TB-M1 | — | — | 1,010 r/min | 2,440 r/min |
| NTN NU2338 | 1,400 r/min | 1,700 r/min | — | — |
| Timken NU2338EMA | 1,000 r/min | 1,100 r/min | — | — |
References
- SKF — SKF Group, Rolling Bearings, PUB BU/P1 17000/1 EN, Oct. 2018.
- NSK — NSK Ltd., Rolling Bearings for Industrial Machinery, CAT. No. E1103, Tokyo, Japan, Jan. 2025.
- Schaeffler (FAG) — Schaeffler Technologies AG & Co. KG, Rolling Bearings, HR 1, Herzogenaurach, Germany, Feb. 2025.
- NTN — NTN Corporation, Ball and Roller Bearings, CAT. No. 2203-3E, Osaka, Japan, Sep. 2000.
- Timken — The Timken Company, Cylindrical Roller Bearing Catalog 10447, North Canton, OH, USA.
About This Type
Cylindrical roller bearings carry high radial loads at high speeds; line contact between rollers and raceways provides much higher radial capacity than a ball bearing of the same size. Typical applications include electric motors, gearboxes, pumps, traction motors and — in double-row designs — machine-tool spindles and rolling mills.
The rib configuration determines the axial behaviour. NU and N designs allow free axial displacement between shaft and housing, so they serve as the floating end where thermal expansion must be absorbed. NJ locates the shaft in one axial direction; NUP — an NJ with a loose rib washer — locates it in both directions and serves as the locating end. Full-complement designs (NCF, SL, NNCF …) fit the maximum number of rollers for the highest radial ratings, at the cost of limiting speed, while the double-row NN and NNU designs sacrifice compactness for rigidity. Unlike tapered roller bearings, cylindrical roller bearings use the CN/C2/C3/C4 clearance groups; the group is selected on the basis of the fits and the temperature gradient.
Inner and outer rings are separable on NU, N, NJ and NUP designs, so each ring can be mounted with its own interference fit — an advantage in tight assemblies. On NUP bearings, the loose rib washer must be fitted on the correct side; on floating-end NU/N arrangements, the fit must prevent creep without blocking axial displacement. Never use an NU or N bearing to locate a shaft axially.
Series note: The NU design has no ribs on the inner ring, so the shaft inner ring can move axially relative to the outer ring — the standard floating-end choice.
Related Guides
Disclaimer: Data on this page is compiled from publicly available online sources for reference only, and not every model appears in a manufacturer's published catalog. Values may differ between sources and editions — always verify against the manufacturer's current documentation before design or purchase.Full disclaimer →