6415 Deep Groove Ball Bearing (75x190x45mm)
How to read this designation →
Bearing dimensions and basic technical information.
Schematic only — for the actual construction, refer to each manufacturer's information.
Manufacturer Ratings
Load-rating symbols are printed as each manufacturer writes them in its own catalogue, so the same quantity can carry a different symbol from brand to brand.
| Brand | Dynamic Load Rating | Static Load Rating | Fatigue Load Limit |
|---|---|---|---|
| SKF 6415 | 153 kN | 114 kN | 4.15 kN |
| Schaeffler (FAG) 6415-M | 141 kN | 97 kN | 6 kN |
| NTN 6415 | 152 kN | 99 kN | 6.7 kN |
Speed Ratings
Speed limits depend on sealing and lubrication, and definitions differ by manufacturer. Contact-sealed variants are normally greased for life and run slower. Always confirm the exact variant in the manufacturer's table.
| Brand | Grease open / shielded | Oil open | Reference | Limiting |
|---|---|---|---|---|
| SKF 6415 | — | — | 8,000 r/min | 5,000 r/min |
| Schaeffler (FAG) 6415-M | — | — | 5,600 r/min | 6,600 r/min |
| NTN 6415 | 3,800 r/min | 4,500 r/min | — | — |
References
- SKF — SKF Group, Rolling Bearings, PUB BU/P1 17000/1 EN, Oct. 2018.
- Schaeffler (FAG) — Schaeffler Technologies AG & Co. KG, Rolling Bearings, HR 1, Herzogenaurach, Germany, Feb. 2025.
- NTN — NTN Corporation, Ball and Roller Bearings, CAT. No. 2203-3E, Osaka, Japan, Sep. 2000.
Related Guides
Disclaimer: Data on this page is compiled from publicly available online sources for reference only, and not every model appears in a manufacturer's published catalog. Values may differ between sources and editions — always verify against the manufacturer's current documentation before design or purchase.Full disclaimer →