6019-RS Deep Groove Ball Bearing (95x145x24mm)

How to read this designation →

Bearing dimensions and basic technical information.

Schematic of a single-side contact-sealed (RS) single-row deep groove ball bearing with one rubber seal

Schematic only — for the actual construction, refer to each manufacturer's information.

Bore diameter (d)95 mm

Outer diameter (D)145 mm

Width (B)24 mm

TypeDeep Groove Ball Bearing

RowSingle Row

ClearanceCN

Cage

Material Steel

Base model: 6019

Related designations: Timken 6019-RS

Suffix Information

Suffix CodeRS
CategorySeal
MeaningContact seal on one side
DescriptionRubber seal on one side whose lip runs against the inner ring, giving the best protection against dirt and moisture; the rubbing contact costs friction and raises the running temperature, so the limiting speed is below the shielded and open versions.

Manufacturer Ratings

Load-rating symbols are printed as each manufacturer writes them in its own catalogue, so the same quantity can carry a different symbol from brand to brand.

BrandDynamic Load RatingStatic Load Rating
Timken 6019-RSCr60.5 kNC0r51 kN

Speed Ratings

Speed limits depend on sealing and lubrication, and definitions differ by manufacturer. The figures below are for this sealed version (6019-RS). Contact seals are greased for life and run slower than the open bearing. Always confirm the exact variant in the manufacturer's table.

BrandGrease
sealed (RS)		Oil
sealed (RS)		ReferenceLimiting
Timken 6019-RS————

Timken does not publish a limiting speed for this sealed variant.

References

  1. Timken — The Timken Company, Deep Groove Ball Bearings, Catalog 10857, North Canton, OH, USA.

Related Bearings

Bearings with the same boundary dimensions (95 × 145 × 24 mm), across types and variants.

Deep Groove Ball Bearing6019 | 6019-2RS | 6019-2RZ | 6019-2Z | 6019-Z
Angular Contact Ball Bearing7019
Tapered Roller BearingJP10044/JP10010
Cylindrical Roller BearingNU1019
Four-Point Contact Ball BearingQJ1019

Related Guides

Open vs Shielded vs Sealed: Which Bearing Closure to ChooseOpen, ZZ metal shields or 2RS rubber seals? Compare friction, speed, protection and relubrication to pick the right closure for your application.6204 vs 6304: Same Bore, Different Capacity6204 and 6304 both fit a 20 mm shaft, but the 6304 carries roughly 20% more load. Compare dimensions, load ratings and speed limits — and learn when the heavier series is worth it.Bearing Basics: What Bearings Do and How to Use This SiteNew to bearings? Learn what a bearing does, the parts it is made of, and how to find your way around Berolix.How to Measure a Bearing: Bore, OD and WidthHow to measure a bearing with calipers: bore, OD and width — then turn three numbers into the right designation.How to Read a Bearing DesignationDecode bearing numbers like 6204-2RS or 6210/C3: type codes, dimension series, bore codes, and the most common prefixes and suffixes.Load Ratings Explained: What C, C0, Cr and C90 Really MeanBasic dynamic and static load ratings are ISO quantities, but every manufacturer prints its own symbols. A brand-by-brand guide to C/C0, Cr/C0r, Ca/C0a, Ce/Co and Timken's C90 — plus the C0 versus Co glyph trap.

Disclaimer: Data on this page is compiled from publicly available online sources for reference only, and not every model appears in a manufacturer's published catalog. Values may differ between sources and editions — always verify against the manufacturer's current documentation before design or purchase.Full disclaimer →