23144 Spherical Roller Bearing (220x370x120mm)
How to read this designation →
Bearing dimensions and basic technical information.
Manufacturer Ratings
Load-rating symbols are printed as each manufacturer writes them in its own catalogue, so the same quantity can carry a different symbol from brand to brand.
| Brand | Dynamic Load Rating | Static Load Rating | Fatigue Load Limit |
|---|---|---|---|
| SKF 23144 CC/W33 | 1888 kN | 2750 kN | 232 kN |
| NSK 23144CAME4 | 1960 kN | 2710 kN | — |
| Schaeffler (FAG) 23144-BE-XL | 1860 kN | 2700 kN | 223 kN |
| NTN 23144EMD1 | 2190 kN | 2940 kN | 128 kN |
| Timken 23144EJ | 1940 kN | 2740 kN | — |
| Timken 23144EMB | 1940 kN | 2740 kN | — |
Speed Ratings
Speed limits depend on sealing and lubrication, and definitions differ by manufacturer. The figures below are for the open version of this bearing. Always confirm the exact variant in the manufacturer's table.
Sealed and shielded versions such as 2Z or 2RS have their own pages; a machined brass cage writing gets its own ↳ row where the catalogue prints a different limit.
| Brand | Grease open / shielded | Oil open | Oil forced circulation | Thermal speed rating | Reference grease | Reference oil | Reference | Limiting |
|---|---|---|---|---|---|---|---|---|
| SKF 23144 CC/W33 | — | — | — | — | — | — | 1,300 r/min | 1,700 r/min |
| NSK 23144CAME4 | 710 r/min | 950 r/min | 1,800 r/min | 1,300 r/min | — | — | — | — |
| Schaeffler (FAG) 23144-BE-XL | — | — | — | — | — | — | 1,080 r/min | 1,860 r/min |
| NTN 23144EMD1 | 1,000 r/min | 1,300 r/min | — | — | — | — | — | — |
| Timken 23144EJ | — | — | — | — | 1,000 r/min | 1,200 r/min | — | 1,810 r/min |
| Timken 23144EMB | — | — | — | — | 1,000 r/min | 1,200 r/min | — | 1,760 r/min |
References
- SKF — SKF Group, Rolling Bearings, PUB BU/P1 17000/1 EN, Oct. 2018.
- NSK — NSK Ltd., Rolling Bearings for Industrial Machinery, CAT. No. E1103, Tokyo, Japan, Jan. 2025.
- Schaeffler (FAG) — Schaeffler Technologies AG & Co. KG, Rolling Bearings, HR 1, Herzogenaurach, Germany, Feb. 2025.
- NTN — NTN Corporation, Ball and Roller Bearings, CAT. No. 2203-3E, Osaka, Japan, Sep. 2000.
- Timken — The Timken Company, Spherical Roller Bearing Catalog, North Canton, OH, USA.
About This Type
Spherical roller bearings carry very high radial loads together with axial loads in both directions, and their spherical outer-ring raceway accommodates shaft misalignment and housing deflection. Typical applications include vibrating screens, conveyors, mining and cement machinery, paper machines, industrial gearboxes and wind-turbine main shafts.
The self-aligning capability makes this type the default where the housing cannot be aligned precisely or the shaft deflects under load. For a given bore size, the 222 and 223 series provide higher load ratings at the expense of envelope size; the 230 and 239 series are narrow, light designs for arrangements where radial space or speed is critical; and the 240 and 241 series are wider light-series designs that raise load ratings where the diameter is limited but axial width is available. Because these bearings often run hot and under heavy load, C3 or C4 clearance is commonly specified; the catalogue limits for the axial-to-radial load ratio should be observed, since a very light radial load combined with a high axial load can cause roller skidding.
Most spherical roller bearings are available with a cylindrical or tapered bore (suffix K or K30); tapered-bore versions are mounted on adapter or withdrawal sleeves, or directly on a tapered shaft seat. Mounting a tapered-bore bearing is carried out by the drive-up method: the clearance reduction or axial displacement is measured — typically the clearance with a feeler gauge — rather than relying on nut torque alone. The initial clearance must be selected so that sufficient residual clearance remains after interference fitting and at operating temperature.
Series note: The 231 series is a wide light-series design with higher ratings than the 230 series for the same bore.
Related Guides
Disclaimer: Data on this page is compiled from publicly available online sources for reference only, and not every model appears in a manufacturer's published catalog. Values may differ between sources and editions — always verify against the manufacturer's current documentation before design or purchase.Full disclaimer →